Price-List

 
P20
P20UM
Modification P20UM
UM1
UM4
UM14
Foam capacity [m3/hr]
4
2-6
1-6
2-12
1-12
Feed capacity [l/min]
2
1-3
0,5-3
1-6
0,5-6
Polyisocyanate pitch
0,1
0,1
0,1
0,1
0,1
Polyester-to-polyisocyanate ratio
1:1 1:2
Main gear-type pumps
NSh-20
Hose length [m]
10 m, may be extended to 30 m
Permanent tanks
Permanent tanks not included
Power requirement [kW]
0,75
Unit weight [kg]
80
82
85
85
88
PRICE [RUR]
111510
135051
139535
139535
144019
Additional(replacement) spray gun price: RUR SG01 / SG05 - 14 691/ 14 514.

The base power supply voltage is 380V for all the models. There is an option for 220V. The operation requires compressed air (compressors are not included in the scope of supply): pressure 6 to 7 atm, consumption 500 to 600 L/min.

NOTE: The price of a separately supplied Spray Gun SG01 / SG05 (for integration into third-party equipment units) is RUR 15 576 / 15 222.

NOTE: The Pouring Head is NOT included in the unit price and must be purchased separately.

NOTE: The production rate of P20UM can be smoothly adjusted with an electronic control.

# Description
Quantity
PRICE [RUR]
1 Pumping station PENA-98 P20 UM4
1 set
374 178
2 Low pressure mechanical mixer ZG-016
1 set
3 Operating console ZG 016
1 piece
4 Manipulator
1 piece
41 005
5 Set of two service tanks 227 l capacity, provided with intermixing system for polyol
1 set
15 694
6 Compressor system K25-M
1 piece
21 830
# Description
Quantity
PRICE [RUR]
1 Pumping station PENA-98 P75 UM
1 set
608 998
2 Low pressure mechanical mixer ZG-016M
1 set
3 Operating console ZG 016B
1 set
4 Manipulator
1 piece
41 005
5 Set of two service tanks 227 l capacity, provided with intermixing system for polyol
1 set
15 694
6 Compressor system K25-M
1 piece
21 830
Copyright 2006, New Construction Technologies, Inc
Site created by Atlas, Inc. All Rights Reserved